Manual hydraulic widening paper tube truck
+
  • Manual hydraulic widening paper tube truck

Manual hydraulic widening paper tube truck


Hongfu hydraulic pallet truck" uses the principle of hydraulic lever to raise the hydraulic rod in the oil cylinder, and at the same time drives the crank (bull leg) to rotate, driving the connecting rod to lift the front wheel bracket to achieve the purpose of carrying heavy objects.
Capacity:

Classification: 

Hongfu brand series
Manual hydraulic trailer
  • Product Description
    • Commodity name: Manual hydraulic widening paper tube truck

    Hongfu hydraulic pallet truck" uses the principle of hydraulic lever to raise the hydraulic rod in the oil cylinder, and at the same time drives the crank (bull leg) to rotate, driving the connecting rod to lift the front wheel bracket to achieve the purpose of carrying heavy objects.

     

    Model Unit E2503 E2503
    Load capacity mm 2500 2000
    Body width mm 960 960
    Fork plate length mm 2250 2500
    Lowest Bit mm 85 85
    Highest mm 155 155
    Inner width of fork plate mm 600 600
    Load wheel material specification mm Ø80X60 (Nylon) Ø80X60 (Nylon))
    Rotating wheel material specification mm Ø180X50 (Nylon)) Ø180X50 (Nylon))

     

     

     

     

     

     

     

     


     

     

    Working principle and product characteristics
     



    "Hongfu hydraulic pallet truck" uses the principle of hydraulic lever to raise the hydraulic rod in the oil cylinder, and at the same time drives the crank (bull leg) to rotate, driving the connecting rod to lift the front wheel bracket to achieve the purpose of carrying heavy objects.
    "Hongfu Hydraulic Tow Truck" has the only design load reduction and balance function of domestic tow truck at present, which can make the goods drop smoothly and ensure that the goods are free from the danger of damage.
    "Hongfu Hydraulic Trailer" adopts high-tension pressurized steel plate structure in the body part, and the oil pressure group part is processed by CNC lathe and welded by full-automatic mechanical arm to ensure excellent and reliable quality.
    The performance of dexterous control can make you handy in use and achieve twice the result with half the effort.

     

     


     

     

    Installation steps
     


    1. Make the lifting rod 09 on the handle face the right-hand direction, remove the torque connecting shaft 19 on the handle, insert it into the matching hole of the oil pressure side plate of the handle (pay special attention: the notch on the torque connecting shaft 19 faces the ground), and drive the elastic cylindrical pin 20.
    2. Press down the handle slightly to take out the pin inserted in the hole of the oil pressure side plate of the oil pressure welding 51.
    3. Pass the chain screw 05 through the center hole of the torque connecting shaft 19.
    4. Pass the chain screw 05 through the groove of the oil return pressure plate 57, and place the M5 nut 03 and flat washer 04 on the chain screw 05 above and below the groove on the oil return pressure plate 57 respectively.
    5. Test the three gears of the handle (up, neutral and down). If it is abnormal, please fine-tune the position of M5 nut 03 on the chain screw 05. When the handle is in the neutral position, press the handle down, I .e. it does not rise or fall.

    6. The numerical expressions recited above are from the instructions for use.

     

     

    Installation steps of manual trailer

     

    1. Unpack (as shown in the figure) 2. The big hole of the fingertip on the handle cover should face upward. 3. Lower the lifting chain from the middle hole 4. Push the handle pin into place, press down the handle and take out the spring pin on your hand.
    5. Lifting screw positioning 6. Commissioning forklift lift normal 7. Press down the handle and knock down the distribution pin 8. The bolt is installed and the handle is installed successfully.

     

     


     


    Maintenance common sense
     



    1. The trailer has relatively rotating parts: torque connecting shaft 19, corbel hexagon pin 53, pull rod groove shaft core 61, body connecting shaft 65, front wheel bracket fixing seat shaft core 67, and front wheel bracket pull The axle core 69 is regularly injected with grease.
    2. After long-term use of the handle wire drawing and the chain, there is the possibility of deformation and elongation, which will affect the control of the three gears of the handle. It is possible to link the M5 nut 03 on the chain screw 05 to restore the original performance.
    3. The trailer should avoid high humidity exposure, rain, contact with corrosive items.
    4. Trailer for a long time load frequent use or improper maintenance, may cause the front and rear wheel rotation difficulties, should replace the bearing (6204ZZ type).
    5. After long-term use, the front and rear wheels will gradually wear and tear, which is normal consumption. When there is cracking, damage and the outer diameter is less than 75MM, it is recommended to replace it in time to prevent the overall performance of the trailer (not covered by the warranty).
    6. The trailer is not suitable for use on severely uneven roads, which will cause wear and damage to various components.
    7. The oil pressure group will gradually wear or age after long-term use, causing high and low hydraulic oil to collude or the oil pressure group to lose its working ability, and should be sent to the manufacturer for maintenance.
    8. The numerical expressions recited above are from the instructions for use.

     

     


     

     


    Notice
     
     


     

    1. When loading, it is strictly prohibited to overload, partial load (single fork operation) use, the quality of the goods must be within the allowable load range of the pallet.
    2. The trailer truck is not allowed to be parked for a long time.
    3. When installing in ascent, it is strictly prohibited to press the handle (such as sitting or standing) or to dump the handle for a long time under pressure.
    4. When unloading, the action of changing the handle gear should be slow. Remember to pull the handle violently to avoid heavy objects rushing down, losing balance or excessive impact caused by fork.
    5. Do not disassemble by yourself in case of failure, please ask professional maintenance personnel or send it to the manufacturer for maintenance.

Key words:

Manual hydraulic widening paper tube truck

More Products

Get a free quote

* Note: Please be sure to fill in the information accurately and keep your communication open, we will contact you as soon as possible!

Submission