Electric lift electricity go small gold steel
Electric lift electricity go small gold steel
Electric lift electricity go small gold steel
Electric lift electricity go small gold steel
Electric lift electricity go small gold steel
+
  • Electric lift electricity go small gold steel
  • Electric lift electricity go small gold steel
  • Electric lift electricity go small gold steel
  • Electric lift electricity go small gold steel
  • Electric lift electricity go small gold steel

Electric lift electricity go small gold steel


Operate the rotary knob on the handle to move forward slowly, and accelerate as the rotation angle of the rotary knob increases. When the knob rotates to the bottom, the acceleration is the fastest speed.
Capacity:

Classification: 

Hongfu brand series
Electric lift small gold steel
  • Product Description
    • Commodity name: Electric lift electricity go small gold steel

    Operate the rotary knob on the handle to move forward slowly, and accelerate as the rotation angle of the rotary knob increases. When the knob rotates to the bottom, the acceleration is the fastest speed.

     

    Model Unit  R1501 R1502
    Rated lifting weight kgs 1500
    Load Center mm 600
    Manipulation mode   Walking
    Maximum lifting height mm 115
    Fork minimum height mm 85
    turning radius mm 1490 1490
    Body size (length X width X height) mm 1700x680x1240 1700x680x1240
    Fork length mm 1200
    Outer width of fork mm 680 550
    Driving speed Km/h 4.5
    Maximum climbing capacity (full load/no load) % 4/15
    Drive wheel specifications/dimensions mm Ø220x70
    Drive motor power kw 0.65 0.65
    Battery (voltage/capacity) V/AH 24V/80AH
    Braking mode   Electromagnetic braking
    Self-weight kg 247 245

     

    Special specifications can be customized according to customer requirements

     

     

     

    1

     

     

    Operating Instructions for Use

     



    1. Forward and backward:
    a) Operate the rotary knob on the handle to move forward slowly, and accelerate as the rotation angle of the rotary knob increases. When the knob rotates to the bottom, the acceleration is the fastest speed.
    B) Rotate the rotating knob of the operating handle backward, that is, backward, and accelerate with the increase of the knob angle. Rotate to the bottom, that is, accelerate to the highest speed.

    Attention! Do not arbitrarily change the direction of forward and backward while driving, you must wait for the car to stop before changing.
    2. Direction control:
    a) The turning direction of this machine is controlled by the operating handle. Turn the operating handle to the left, that is, turn left, and turn right, that is, turn right. The turning angle changes with the rotation angle of the handle.
    B) The maximum left-right angle is 175 degrees.

    Attention! When driving at high speed, except for emergency situations, do not make sharp turns, otherwise it is easy to cause the cargo to fall from the carrier, causing injuries and losses.
    3. Parking and braking:
    a) When the acceleration rotary knob returns to the neutral position, the machine will lose the acceleration force and stop slowly.
    Attention! Do not stop the brakes during driving except in emergency situations, otherwise it is easy to cause the cargo to dump.
    4. Lifting operation
    a) Ascension: Press the ascension button until it reaches the required lifting height, and then release the button.
    B) Descend: Press the Descend button until the goods are in place.

    Idea! Whether it is rising or falling fork, it should be carried out smoothly and slowly, and it should not be rushed.

    WARNING: During transportation or maintenance, it is forbidden to roll over the body, otherwise the hydraulic oil of the lifting unit will overflow.
    5. Charging operation:

    a) When the pointer of the voltmeter indicates the area below the red zebra crossing, it indicates that the electric quantity is insufficient. Please charge it in time. Before charging, move the car to an open and well-ventilated area or a designated location to start charging.
    B) Charging sequence: first insert the output plug of the charger into the charging socket, and then insert the input plug into the AC 220V socket to start charging. When it is fully charged, the charging will automatically stop charging. See the charger manual.

    c) Under normal circumstances, the charging time takes 8 to 10 hours. Whether there is sufficient power or not is subject to the indicator light on the charger.
    Attention! When the machine is not in use for a long time, it is also necessary to check and charge once a month. If the battery is completely placed for more than half a year, the battery may generate deep discharge and cause the battery to vulcanize, thus causing the battery to be scrapped.

             Keep away from inflammable and explosive materials when charging

    Statement: The battery is a consumable, and the service life of the battery is closely related to the user's maintenance, so the battery is not covered by the warranty.

     

    1

     

     

    Precautions during operation



    (I) pay attention to the driving direction and keep the line of sight clear.
    If the (II) carries items blocking the forward line of sight, it should be reversed.
    When the (III) is driving forward, pay attention to the position of the front fork to avoid hitting the cargo.
    When the (IV) road conditions are not good, attention should be paid to avoid bumpy obstacles.
    When reversing the (V), pay attention to pedestrians and objects behind.
    (VI) close to the intersection or the front line of sight is not clear, should slow down.
    The (VII) shall not be continuously driven on the slope road for a long time.
    When carrying fluffy goods (VIII), they should be bundled well to avoid being scattered during handling.
    When carrying articles (IX), the center of gravity of the articles shall be within the fork load center.
    The (X) must confirm that the cargo is stable enough to start or lift.
    (11) Absolutely prohibit overloading.
    (12) It is forbidden to drive on rainy or watery ground to prevent the gear wear and damage to the electronic control accessories caused by water entering the driving wheel.
    (13) Pay attention to whether the goods carried are placed in balance, unbalanced left and right, and heavy objects beyond the load center, which are easy to deform the machine and overturn during operation, causing personnel and equipment injuries. We are not liable for warranty and compensation.

Key words:

Electric lift electricity go small gold steel

More Products

Get a free quote

* Note: Please be sure to fill in the information accurately and keep your communication open, we will contact you as soon as possible!

Submission